The AC vehicle interface simulator is compatible with national standards and European standards, single-phase three-phase compatibility, Chinese and English interfaces, and an integrated device for interoperability testing。

◆ The equipment is equipped with switches for on-off of each contact circuit of PE, CP, and CC, which can realize the function of testing the on-off fault state of each circuit。
◆ Equipped with R2 resistance, R3 resistance simulation equivalent resistance simulation function。
◆ With charging pile output PWM frequency, PWM duty ratio, detection point 1 voltage, detection point 3 to the PE resistance value display function, can display the frequency and duty ratio of the charging pile output PWM signal, detection Point 1 voltage, detection point 3 to PE resistance display function。
◆ Equipped with a three-phase data acquisition instrument, which can display the voltage and current display function in the loading process in real time, and can display parameters such as power and frequency。
◆ With 1 RS232 communication interface, it can realize the control function of the upper PC。
◆ Meet the charging pile connection confirmation test, charging phase test, charging preparation phase test, normal charging end test, switch S2 disconnection test, vehicle interface disconnection test, PE broken needle test, CC interruption test, CP power-off test, CP grounding test , Output current test, CC and PE loop resistance test, etc。
◆ The device is equipped with 7-inch resistive touch operation and upper computer operation, which can realize the configuration function of parameters and switch status。
◆ Single three-phase test compatibility。

◆ R2 resistance adjustment range is 100~32000Ω, the resistance is continuously adjustable, and the adjustment accuracy is 1Ω。
◆ The nominal value of R3 equivalent resistance is 100~32000Ω, the resistance is continuously adjustable, and the adjustment accuracy is 1Ω。
◆ Built-in high-precision acquisition module, the current is not less than 100A。
◆ The equipment has a standard safety interface of not less than 4mm, which can realize the signal collection function of the current state of various parameters。
◆ The equipment is equipped with European Javelin mount and National Javelin mount, which can be used for testing of European standard charging piles and national standard charging piles。
◆ National standard 42KW three-phase Gun seat。
◆ European standard 21KW three-phase Gun seat。